livechat
Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout


 

 

 

 Checkout
« Previous | Next »
Product ID MT-400
Classic Amplified Motorcycle Speaker System
Classic Amplified Motorcycle Speaker System
1 of 13 (Enlarge)
Price: $369.95
SAVE $59.96
Price: $309.99
Add to cart
  • Description
  • Tech Specs
  • Contents
Description

Top of the line Kicker Speakers are paired with a powerful Clarion amplifier that delivers 400 Watts of pure power. This system is made for high speeds of +80mph, loud pipes, and bikes without windshields, this system has serious power. You will love everything about it, especially how loud and great it sounds.

AUX Input, (Optional Bluetooth Upgrade*) simply plug the system into the headphone jack of your favorite audio device. Includes a thumb dial volume control that can be secured to the handlebars for easer volume adjustments while riding. 
*Bluetooth upgrade turns this system in a Bluetooth Edition with AUX Input, which means you can wirelessly connect the system to your Bluetooth enabled device, and/or use the AUX input to plug the system into the headphone jack of your favorite audio device. Includes a glove friendly remote control with push buttons for Power/Track/Play/Pause Volume controls, that mounts to the handlebar or factory handlebar bolts for the clutch/brake. 

 

 

 

Tech Specs - of Speakers and Amp are listed below

 

Simple Installation: Instructions are included, but our kit is designed to be easy for self-install. Basically, the system wires to positive and negative battery terminals, and to a switched and fused power supply on your bike (headlight wire/fuse box) so that it turns on/off with the key. Then the speakers connect to the amplifier by the butt connectors. The amplifier either plugs into the headphone jack of your device and you're are ready to ride! We made the installation simple, but if you don't feel comfortable contact your local car audio shop and they can install for you. 

The Amplifier has a small footprint of 7.17 x 1.54 x 3.23 and can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1SampleBag2

  • Easy Installation
  • Highway Rated for 80mph+

Amplifier Specs

  • 400 Watts Peak - (150 Watts x 2 RMS)
  • Amplifier Size  7.17 x 1.54 x 3.23
  • MOS-FET Power Supply
  • Variable Gain Control
  • Turn-On/Off Muting Circuitry (Soft Mute)
  • Ground loop isolation circuitry
  • CEA-2006 Compliant Amplifier
  • Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Turn-On/Off Muting Circuitry (Soft Mute)
  • Nickel heat-sink for extreme heat dissipation
  • Input sensitivity:
    • Line level: 200mV-8V
    • Speaker level: 600mV-20V
  • Frequency Response: 20 - 30,000Hz
  • Total Harmonic Distortion (THD): ≤1%
  • Signal to Noise Ration: 70dB
  • Variable high-pass filter: 15 - 250Hz, 12dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
  • Circuit Boards Coated in a Moisture Resistant Polymer
  • Pulse Width Modulation Regulated Power Supply
  • Meets or Exceeds ASTM B117 (Salt Fog Exposure)
  • Meets or Exceeds ASTM D4329 (UV Exposure)

Speaker Specs

Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot claim to have the best, unless we use the best components.  Before we select a speaker to use in our systems we run vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker KS-Series Speakers as the best sounding and best preforming speakers. When paired with the Cerwin Vega amplifier these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems. 

  • 4" Kicker 44KSC404 Speakers
  • Locations (handlebars/crashbars/forks)
  • Stainless Steel Waterproof Speaker Housings
  • Stainless Steel Black Speaker Grilles
  • Stainless Steel Mounting Hardware
  • Speaker Size: (5" dia x 4" depth)
  • Continuous Power Handling 75W each
  • Peak Power Handling 150W each
  • 4 ohms impedance
  • Frequency Response: 60-20,000 Hz
  • Sensitivity: 88dB
  • High Power Handling
  • Extended Dynamic Range
  • Polypropylene Woofer and Tough Rubber Surrounds

 

 

Contents

 

 
1 Product Reviews - Average rating 5 / 5 (Show All)

Click to review this product

nice system

- 6/30/2018

I recommend this system over boom. It sounds good, and is much louder. I am happy with my purchase.

Click to review this product

Hands
Motorcycle Tunes

Motorcycle Tunes was founded in 1999 and has continued to lead the motorcycle audio industry with the highest quality products at the lowest possible prices. Our systems are Seriously Loud with Deeper Bass and No Distortion.

o Universal Fit
o Designed for bikes with loud pipes
o Highway Rated
o Factory Quality meets Superior Performance. 
o Made in Abilene, Texas 

For your security
Terms and Conditions
Privacy Policy