Description

300 Watts RMS = 150 Watts x 2 True Actual Power
 

Kicker Speakers in Metal Housings
Mini Amplifier
Bluetooth Edition (Pair with your phone for wireless audio)
AUX Input (connects to standard headphone jack of your favorite audio device)
Handlebar Mountable Remote Control (glove friendly design)
Handlebar/Highway bar mountable speakers
Complete Easy To Install Kit
Built In Abilene, Texas

 

Enjoy at 80 mph+ and on bikes with loud pipes or no windshields.    

 

 

 

Tech Specs - of Speakers and Amp are listed below

 

Simple Installation: Instructions are included, but our kit is designed to be easy for self-install. Basically, the system wires to positive and negative battery terminals, and to a switched and fused power supply on your bike (headlight wire/fuse box) so that it turns on/off with the key. Then the speakers connect to the amplifier by the butt connectors. The amplifier either plugs into the headphone jack of your device, or to the Bluetooth controller, and you're are ready to ride! We made the installation simple, but if you don't feel comfortable contact your local car audio shop and they can install for you. 

The amplifier can be mounted in a saddlebag, travel trunk, or in a tool/fork bag like one of these SampleBag1, SampleBag2

• Easy Installation
• Highway Rated for 80mph+

Amplifier Specs

• Marine Certified 2-Channel Class D Car Amplifier
• Peak Power Rating: 880 Watts
• RMS Power Rating:
  • 4 ohms: 150 watts x 2 chan.
  • 2 ohms: 220 watts x 2 chan.
  • Bridged, 4 ohms: 440 watts x 1 chan.
• Cutting edge Micro Class D technology allows amplifier to be extremely compact
• LED power (blue) and protect (red) indicators
• Conformal Coated Marine grade circuit board
• Balanced Differential Inputs, to eliminate noise picked up by signal cables
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Input sensitivity: 0.2V-5V
• Selectable crossover modes: FULL / HPF / LPF
• Variable high-pass filter (40-500 Hz)
• Variable low-pass filter (40-500 Hz)
• Frequency Range : 20 - 20KHz
• CEA-2006 compliant amplifier
• Dimensions: 6.8"L x 3.3"W x 1.5"H

 

Speaker Specs

Why do we use Kicker Speakers? - We are serious about the components of our products, we cannot make the best products, unless we start with the best components.  Before we selected a speaker to use in our systems we ran vigorous lab test, road test, and conduct blind sound test of all high end 4" speakers on the market (including Polk, Infinity, JBL, Pioneer, Kenwood, Alpine, Rockford Fosgate to name a few). We selected the Kicker CS-Series Speakers as the best sounding and best preforming speakers. When paired with the NVX amplifier these Kicker speakers played louder with less distortion and deeper bass response. We 100% believe that these Kicker Speakers are the BEST sounding 4" speakers on the market, so we became an AUTHORIZED Kicker Dealer and choose to use them in ALL of our systems. 

 

 

• 4" Kicker 46CSC44 Speakers
• Locations (handlebars/crashbars/forks)
• Stainless Steel Waterproof Speaker Housings
• Stainless Steel Black Speaker Grilles
• Stainless Steel Mounting Hardware
• Speaker Size: (5" dia x 4" depth)
• Continuous Power Handling 50W each
• Peak Power Handling 150W each
• 4 ohms impedance
• Frequency Response: 60-20,000 Hz
• Sensitivity: 88dB
• High Power Handling
• Extended Dynamic Range
• Polypropylene Woofer and Tough Rubber Surrounds

 

 

 

 

Contents

Complete Audio System, just add your favorite audio device (phone,MP3 Player, ect)

• NVX VADM2 Marine Grade Amplifier 
• 2 Three-piece mounting clamps 
• Bluetooth with Aux Input
• Handlebar/Clutch/Brake Mountable Remote Control
• 2 Kicker CS-Series speakers 
• 2 Three-piece mounting clamps 
• Choice of Input (Aux Input, Bluetooth, or Bluetooth with Remote)
• 4 Cable ties
• Wire Loom
• 4 Butt Connectors (speaker to amplifier)
• 30 Amp Inline Fuse
• Power/Ground wires with battery terminals
• Installation Instructions
• 30 Day Satisfaction Guarantee
• Limited Lifetime Warranty